Bp Premier Downloads
Program Updates
- Back up your Bp Premier database before running the upgrade.
- Synchronise all workstations in remote database mode with the Bp Premier server before you upgrade.
- Download and run the latest Drug Update on your Bp Premier server computer.
- Log all users out of the server and all clients before you upgrade.
- Download and run the 1.12.1.1018 update on your server and all clients.
- Log back in to Bp Premier and resume use.
- Medicare Web Services are enabled in Orchid for Online Patient Verification, AIR and Online Claiming via PRODA. Before you can configure your connection with PRODA, you must:
- Ensure your organisation has been successfully set up in PRODA. See Connect to Medicare Web Services for more information.
- You must upload all prior immunisation records to the AIR before upgrading to Orchid.
- Please ensure you have read the Bp Premier Upgrade Guide prior to proceeding with the upgrade. It is important to note that upgrades should be completed outside of business hours (with no users connected).
- For Clinics using Best Practice version 1.11.1.934 please refer to the Orchid Upgrade Guide.
- Ensure you are using Best Practice version 1.11.1.934 or higher and the Latest Data Update has been applied
- NET Framework 4.8
- Medicare Web Services are enabled in Saffron SP3 for Online Patient Verification via PRODA. Before you can configure your connection with PRODA, you must:
- Ensure your organisation has been successfully set up in PRODA. See Connect to Medicare Web Services for more information.
- You must upload all prior immunisation records to the AIR before upgrading to Saffron SP3.
- Please ensure you have read the Bp Premier Upgrade Guide prior to proceeding with the upgrade. It is important to note that upgrades should be completed outside of business hours (with no users connected).
- For Clinics using Best Practice version 1.8.4.642 (Summit) please refer to the Upgrade Checklist included in the Bp Premier Summit to Saffron Upgrade Guide for important information regarding the significant changes included in our Saffron release.
- Ensure you are using Best Practice version 1.9.1.863 or higher and the Latest Data Update has been applied
- NET Framework 4 (installs automatically if not present, however will require a reboot of the PC)
- Before you run a program upgrade on the Bp Premier server, ensure that any workstations in remote download mode have been synchronised with the server database. If you do not synchronise laptops in remote mode before you upgrade, you will have to re-enter all information recorded while in remote mode. For instructions on how to synchronise, review the section Synchronise new data with the server. In this case, all users will need to log out of Bp Premier until the upgrade is complete on the server.
- Please ensure you have read the Bp Premier Upgrade Guide prior to proceeding with the upgrade. It is important to note that upgrades should be completed outside of business hours (with no users connected).
- Â For Clinics using Best Practice version 1.8.4.642 (Summit)Â please refer to the Upgrade Checklist included in the Bp Premier Summit to Saffron Upgrade Guide for important information regarding the significant changes included in our Saffron release.
- Â Ensure you are using Best Practice version 1.9.1.863 or higher and the Latest Data Update has been applied
- Â NET Framework 4 (installs automatically if not present, however will require a reboot of the PC)
- Before you run a program upgrade on the Bp Premier server, ensure that any workstations in remote download mode have been synchronised with the server database. If you do not synchronise laptops in remote mode before you upgrade, you will have to re-enter all information recorded while in remote mode. For instructions on how to synchronise, review the section Synchronise new data with the server. In this case, all users will need to log out of Bp Premier until the upgrade is complete on the server.
- Please ensure you have read the Bp Premier Upgrade Guide prior to proceeding with the upgrade. It is important to note that upgrades should be completed outside of business hours (with no users connected).
- Â For Clinics using Best Practice version 1.8.4.642 (Summit)Â please refer to the Upgrade Checklist included in the Bp Premier Summit to Saffron Upgrade Guide for important information regarding the significant changes included in our Saffron release.
- Â Ensure you are using Best Practice version 1.9.1.863 or higher and the Latest Data Update has been applied
- Â NET Framework 4 (installs automatically if not present, however will require a reboot of the PC)
- Before you run a program upgrade on the Bp Premier server, ensure that any workstations in remote download mode have been synchronised with the server database. If you do not synchronise laptops in remote mode before you upgrade, you will have to re-enter all information recorded while in remote mode. For instructions on how to synchronise, review the section Synchronise new data with the server. In this case, all users will need to log out of Bp Premier until the upgrade is complete on the server.
Please refer to the Bp Premier Orchid SP1 release notes for a full list of changes and enhancements within this version.
You must have the May 2023 data update or later installed before you upgrade to 1.12.1.1018.
If you are unfamiliar with applying Bp Premier updates, the following Knowledge base article explains how to download an update from this site.
Please see the links below for further guidance:
Please note: If the file does not download immediately, please right-click the Download button and click Save link as.
Download
Version(s) Supported | From 1.11.2.952 to 1.12.1.1018 |
File Name | BP_1.12.1.1018.exe |
File Size | 454MB |
Md5 check file | check file |
Last updated | 31/07/2023 |
Revision | Service Pack 1 |
For a full list of changes please refer to the Orchid Release notes.
Before you perform the Program Update:
NOTE: If .NET 4.7 is not already installed on your Server, it will get installed as part of the Program Update and a reboot will be required, therefore the update cannot be performed while Bp Premier is in use.
The Orchid release of Bp Premier is dependent on Microsoft .NET Framework 4.7+. The installation cannot proceed without the Microsoft system requirements for this version. If the minimum requirements are not met, please refer to ‘Microsoft Update Catalog’ 4019990 or, apply the latest Windows updates from Microsoft or, speak to your IT provider before trying again.
If you are unfamiliar with applying Bp Premier updates, the following Knowledge base article explains how to download an update from this site.
Please see the links below for further guidance:
IMPORTANT: This update will need to update the database tables used by the program. Best Practice Software recommends updating the server outside of business hours. After applying to the server, the upgrade can then be applied to each workstation, this workstation update should only take a few minutes. Due to new features released in the Indigo update it is a requirement that any sites using Management update all clients immediately as Management functions will be disabled in previous versions that connect to a Saffron server install.
After upgrading, the Setup Third-Party Integrations screen will prompt you to enable the specific partner role for any third-party database integrations that your practice uses. You must enable integrations from this screen; all legacy integrations will be disabled after upgrading to Saffron.
Please note: If the file does not download immediately, please right-click the Download button and click Save link as.
Download
Version(s) Supported | 1.11.1.934 to 1.12.0.998 |
File Name | BP_1.12.0.998.exe |
File Size | 452MB |
Md5 check file | check file |
Last updated | 24/01/2023 |
Revision |
For a full list of changes please refer to the Saffron SP3R1 Release notes.
Before you perform the Program Update:
NOTE: If .NET 4.6.2 is not already installed on your Server a reboot is required, therefore the update cannot be performed while Bp Premier is in use.
In this case, all users will need to log out of Bp Premier until the upgrade is complete on the server.
If you are unfamiliar with applying Bp Premier updates, the following Knowledge base article explains how to download an update from this site.
Please see the links below for further guidance:
IMPORTANT: This update will need to update the database tables used by the program. Best Practice Software recommends updating the server outside of business hours. After applying to the server, the upgrade can then be applied to each workstation, this workstation update should only take a few minutes. Due to new features released in the Indigo update it is a requirement that any sites using Management update all clients immediately as Management functions will be disabled in previous versions that connect to a Saffron server install.
After upgrading, the Setup Third-Party Integrations screen will prompt you to enable the specific partner role for any third-party database integrations that your practice uses. You must enable integrations from this screen; all legacy integrations will be disabled after upgrading to Saffron.
Please note: If the file does not download immediately, please right-click the Download button and click Save link as.
Download
Version(s) Supported | 1.9.1.863 to 1.11.3.974 |
File Name | BP_1.11.3.974.exe |
File Size | 356MB |
Md5 check file | check file |
Last updated | 17/05/2022 |
Revision | R1 |
For a full list of changes please refer to the Saffron SP1 Release notes.
Before you perform the Program Update:
NOTE:Â If .NET 4.6.2 is not already installed on your Server a reboot is required, therefore the update cannot be performed while Bp Premier is in use.
In this case, all users will need to log out of Bp Premier until the upgrade is complete on the server.
If you are unfamiliar with applying Bp Premier updates, the following Knowledge base article explains how to download an update from this site.
Please see the links below for further guidance:
IMPORTANT: This update will need to update the database tables used by the program. Best Practice Software recommends updating the server outside of business hours. After applying to the server, the upgrade can then be applied to each workstation, this workstation update should only take a few minutes. Due to new features released in the Indigo update it is a requirement that any sites using Management update all clients immediately as Management functions will be disabled in previous versions that connect to a Saffron server install.
After upgrading, the Setup Third-Party Integrations screen will prompt you to enable the specific partner role for any third-party database integrations that your practice uses. You must enable integrations from this screen; all legacy integrations will be disabled after upgrading to Saffron.
Please note: If the file does not download immediately, please right-click the Download button and click “Save link as“.
Download
Version(s) Supported | 1.9.1.863 to 1.11.1.934 |
File Name | BP_1.11.1.934.exe |
File Size | 347MB |
Md5 check file | check file |
Last updated | 09/06/2021 |
Revision |
For a full list of changes please refer to the Saffron Release notes.
Before you perform the Program Update:
NOTE:Â If .NET 4.6.2 is not already installed on your Server a reboot is required, therefore the update cannot be performed while Bp Premier is in use.
In this case, all users will need to log out of Bp Premier until the upgrade is complete on the server.
If you are unfamiliar with applying Bp Premier updates, the following Knowledge base article explains how to download an update from this site.
Please see the links below for further guidance:
IMPORTANT: This update will need to update the database tables used by the program. Best Practice Software recommends updating the server outside of business hours. After applying to the server, the upgrade can then be applied to each workstation, this workstation update should only take a few minutes. Due to new features released in the Indigo update it is a requirement that any sites using Management update all clients immediately as Management functions will be disabled in previous versions that connect to a Saffron server install.
After upgrading, the Setup Third-Party Integrations screen will prompt you to enable the specific partner role for any third-party database integrations that your practice uses. You must enable integrations from this screen; all legacy integrations will be disabled after upgrading to Saffron.
Please note: If the file does not download immediately, please right-click the Download button and click “Save link as“.
Download
Version(s) Supported | 1.9.1.863 to 1.11.0.924 |
File Name | BP_1.11.0.924.exe |
File Size | 347MB |
Md5 check file | check file |
Last updated | 13/01/2021 |
Revision |
Utilities
- My Health Record
- HI Service
- Electronic Prescribing
- Secure Messaging
- Select the link below
- Bp Support will provide the required code verbally over the support call
- Enter the code and Start Download
- Small application downloads to your computer to start the support session
- After you’ve opened the application, you will be presented with an agreement.
- Scroll through the agreement and click ‘I Agree’ at the bottom
- During the session, the Technician could be able to fully control your computer.
* Remember, only accept support from individuals and organizations you trust. - Bp Premier Versions 801+
- Contains the latest ‘Medicare Australia Organisation CA’
This utility is for Saffron (1.11.0.924) and Saffron SP1 (1.11.1.934) only.
Best Practice has created a new eHealth Certificate Update Utility to help ensure business continuity for accessing health services like
More information about the eHealth Certificate Update Utility is available here.
Download
Version(s) Supported | 1.11.0.924 and 1.11.1.934 |
File Name | BP_Saffron_CertificateUpdater.exe |
File Size | 650 KB |
Md5 check file | |
Last updated | 30/07/2021 |
Revision |
Download
Version(s) Supported | Saffron and later versions. |
File Name | Tarb-Ex.Zip |
File Size | 12.8 MB |
Md5 check file | |
Last updated | 23/09/2020 |
Revision | 1 |
This will replace your drug database with “November 2021” drugs and other supplied content.
This utility ‘cannot’ be run live.
Download
Version(s) Supported | All |
File Name | BPS_Data_211105_full.exe |
File Size | 1.48GB |
Md5 check file | |
Last updated | 09/11/2021 |
Revision |
This utility switches on the fast-tracked ePrescribing functionality in Bp Premier Jade Sp3 and Jade SP4 only.
Critical Information:
Practices and practitioners must inform patients which pharmacies in their area are eScript ready. If the patient’s pharmacy of choice is not eScript ready, they would then require a paper prescription instead. We have developed numerous resources to help you with this education process.  To get started visit the Knowledge Base for more information, along with this article collating ePrescribing resources.Â
UPDATE: Please note as of January 2020, all Practices can begin using ePrescribing. ePrescribing has been turned on by default with our latest release, Saffron.
Download
Version(s) Supported | |
File Name | BP.EnableEScripts.exe |
File Size | |
Md5 check file | |
Last updated | 23/07/2020 |
Revision |
The TX Control is required and used by Bp for areas such as Prescriptions, Todays Notes, and Word Processor. This utility allows the re-installation and file registration to solve some support related issues.
IMPORTANT If Bp Premier is installed in a Terminal Server or Citrix environment, perform outside of normal practice hours, on the Terminal or Citrix Server, and ensure that there are no active sessions or user profiles connected. |
Download
Version(s) Supported | All versions |
File Name | TX_Register30-15.exe |
File Size | 45.6MB |
Md5 check file | |
Last updated | 04/04/2023 |
Revision | 2 |
Establish incoming and outgoing remote desktop and computer-to-computer connections for real-time support or access to files, networks and programs. After downloading and installing this software, you’ll have your first session up and running within seconds.
Process for using LogMeIn with Bp Support:
Version(s) Supported | All |
File Name | |
File Size | |
Md5 check file | |
Last updated | |
Revision |
Establish incoming and outgoing remote desktop and computer-to-computer connections for real-time support or access to files, networks and programs. After downloading and installing this software, you’ll have your first session up and running within seconds.
KB Article.
Download
Version(s) Supported | All |
File Name | TeamViewerQS.exe |
File Size | 11.6 MB |
Md5 check file | check file |
Last updated | 27/08/2018 |
Revision | 12.1.29852.0 |
Version(s) Supported | All |
File Name | ExportBPData.exe |
File Size | 531KB |
Md5 check file | |
Last updated | 19/09/2019 |
Revision | Jade |
Version(s) Supported | All |
File Name | BpPremier_Fonts_QH.exe |
File Size | 535KB |
Md5 check file | |
Last updated | 14/01/2021 |
Revision | 1 |
Installs files required for operation of Medicare and DVA claiming.
NOTE:
Please note: If the file does not download immediately, please right-click the Download button and click “Save link as“.
Download
Version(s) Supported | 1.8.6.801 and later |
File Name | BP_MAOL_V8_Module.exe |
File Size | 25MB |
Md5 check file | check file |
Last updated | 16/07/2021 |
Revision |
Data Updates
Best Practice Software recommends users update their version of Bp Premier with the latest data, featuring the most up to date PBS, MIMS drug database, medication, template and fee data.
To determine the last update that has been installed: Open Bp Premier > Click the Help menu > Select About > Check Last Drug Update
- Includes all COVID-19 updates.
- MBS Updates
-
Influenza vaccine codes
- Includes all COVID-19 updates.
- MBS Updates
-
Influenza vaccine codes
- Includes all COVID-19 updates.
- MBS Updates
-
Influenza vaccine codes
- Includes all COVID-19 updates.
- MBS Updates
-
Influenza vaccine codes
Size of 296 MB, for servers running Bp 1.9.0.848 or higher that have not installed the August 2023 Data Update. The Comprehensive update requires the February 2023 Data Update to be installed as a minimum prerequisite. If your server has a Data Update older than February 2023 installed, please download, and install the “February 2023 Data Update” first before applying this update.
If you are unfamiliar with applying Best Practice updates, please refer to the Best Practice Software Knowledge base page, Read our Knowledge Base article on updating the drug database.
NOTE:
Please note: If the file does not download immediately, please right-click the Download button and click “Save link as“.
Best Practice Software wishes to advise that the minimum supported Bp Premier version for applying Data Updates is Indigo – 1.9.0.848.
Download
Version(s) Supported | Bp 1.9.0.848 or higher |
File Name | BPS_Data_230901_comp.exe |
File Size | 296 MB |
Md5 check file | check file |
Last updated | 05/09/2023 |
Revision |
Size of 85.2 MB, for servers running Bp 1.9.0.848 or higher that have already installed the August 2023 Data Update. If the August 2023 Data Update has not been installed, you will need to download and apply the “Data Update – Comprehensive – September 2023” update.
If you are unfamiliar with applying Best Practice updates, please refer to the Best Practice Software Knowledge base page, Read our Knowledge Base article on updating the drug database.
NOTE:
Please note: If the file does not download immediately, please right-click the Download button and click “Save link as“.
Best Practice Software wishes to advise that the minimum supported Bp Premier version for applying Data Updates is Indigo – 1.9.0.848.
Download
Version(s) Supported | Bp 1.9.0.848 or higher |
File Name | BPS_Data_230901_inc.exe |
File Size | 85.2MB |
Md5 check file | check file |
Last updated | 05/09/2023 |
Revision |
Size of 375 MB, for servers running Bp 1.9.0.848 or higher that have not installed the January 2023 Data Update. The Comprehensive update requires the February 2022 Data Update to be installed as a minimum prerequisite. If your server has a Data Update older than February 2022 installed, please download, and install the “February 2022 Data Update” first before applying this update.
If you are unfamiliar with applying Best Practice updates, please refer to the Best Practice Software Knowledge base page, Read our Knowledge Base article on updating the drug database.
NOTE:
Please note: If the file does not download immediately, please right-click the Download button and click “Save link as“.
Best Practice Software wishes to advise that the minimum supported Bp Premier version for applying Data Updates is Indigo – 1.9.0.848.
Download
Version(s) Supported | Bp 1.9.0.848 or higher |
File Name | BPS_Data_230203_comp.exe |
File Size | 375 MB |
Md5 check file | check file |
Last updated | 06/02/2023 |
Revision |
Size of 382Mb, for servers running Bp 1.8.3.595 or higher that have not installed the January 2022 Data Update. The Comprehensive update requires the February 2021 Data Update to be installed as a minimum prerequisite.
If your server has a Data Update older than February 2021 Data Update installed, please download, and install:
1. Utility: 2021 Full Drug Replacement. (November 2021/11/05)
2. February 2022 Comprehensive Data Update Revision 1
3. The latest ‘current months’ Comprehensive Data Update
The Full Drug Replacement utility must be run outside of business hours.
If you are unfamiliar with applying Best Practice updates, please refer to the Bp FAQ Download page, ‘Bp FAQ Documentation on Applying a Data Update‘.
Alternatively, you can also visit the Best Practice Software Knowledge base page, ‘Read our Knowledge Base article on updating the drug database‘.
NOTE:
Please note: If the file does not download immediately, please right-click the Download button and click “Save link as“.
Â
Download
Version(s) Supported | Bp 1.8.3.595 or higher |
File Name | BPS_Data_220215_comp.exe |
File Size | 382MB |
Md5 check file | check file |
Last updated | 03/05/2022 |
Revision | 1 |